Electrical Services Across Teesside
NAPIT registered domestic electricians covering Middlesbrough, Stockton-on-Tees, Darlington, Hartlepool and Yarm. Full rewires, consumer unit upgrades, EICR testing, EV charger installation and fault-finding. 500+ five-star reviews.
Teesside's Multi-Trade Electrician
ALPS Electrical is a NAPIT Registered Electrician and Registered Competent Person based in Kirklevington, Yarm — the heart of Teesside's residential market. While we are best known for our solar panel, battery storage and EV charger installations, our foundation is traditional domestic electrical work. Every member of our team is a qualified, time-served electrician, and we carry out the full range of domestic electrical services across Middlesbrough, Stockton-on-Tees, Darlington, Hartlepool and the surrounding areas.
Our NAPIT Registered Competent Person status means we are authorised to self-certify all notifiable electrical work under Part P of the Building Regulations. You receive your Building Regulations certificate directly from us — no council building control inspection, no delays. Every job is completed to BS 7671 18th Edition wiring regulations, fully tested and documented. Our work is backed by TrustMark guarantee-backed insurance.
The combination of traditional electrical competence and renewable energy expertise makes ALPS Electrical genuinely unusual in the Teesside market. We can install your EV charger and upgrade your consumer unit in the same visit. We can survey your existing installation as part of a solar panel design process and identify any remedial work needed before installation. We can carry out your EICR and advise on the most cost-effective path to compliance for your rental property. This multi-trade capability is why many Teesside homeowners and landlords use us as their single point of contact for all domestic electrical and renewable energy work.
Our fully qualified electrical team serves all Teesside postcodes from our Yarm base.
Our Electrical Services in Teesside
Full House Rewires
Complete rewiring projects for Victorian, Edwardian and inter-war properties across Teesside. Old rubber or aluminium wiring replaced with modern PVC-insulated cabling to current BS 7671 standards. All work fully tested and Part P certified.
Consumer Unit Upgrades
Replace old fuse boards with modern RCBO-protected consumer units. Essential before EV charger installation or solar panels in many older properties. Typically completed in one day.
EICR Testing
Electrical Installation Condition Reports (EICR) for landlords and homeowners. Legally required for rental properties every 5 years. Certificates issued within 48 hours. More about EICR testing.
EV Charger Installation
OZEV-authorised home EV charger installation. All major brands: Zappi, Ohme, Wallbox, Tesla Wall Connector. OZEV grant (£350) applied on your behalf. Full EV charger service.
Additional Circuits
New circuits for home offices, garden offices, outbuildings, kitchen extensions, hot tubs, and smart home systems. Fully tested and certified. Minimal disruption with careful cable routing.
Fault Finding and Repairs
Systematic diagnosis of tripping circuits, intermittent faults, flickering lights and power failures. We identify root causes rather than masking symptoms, and carry out remedial work to a full BS 7671 standard.
Teesside's Housing Stock and Electrical Demands
Teesside's housing is remarkably varied, reflecting the region's industrial history and post-war regeneration. Middlesbrough's Victorian terraces in Linthorpe, Gresham and Ayresome typically have electrical installations that date from multiple eras — partial rewires carried out in the 1970s and 1980s that left original rubber-insulated cabling in sections, consumer units that predate RCD protection requirements, and earthing systems that rely on older metallic water pipe connections now discontinued under plumbing regulations. Full rewires in these properties are among the most common jobs we complete in the TS1–TS8 postcodes.
Stockton-on-Tees presents the widest range of housing ages and types in the Tees Valley. Victorian and inter-war properties in Norton and central Stockton require traditional rewiring work, while Ingleby Barwick — one of the largest private housing estates in Europe — primarily needs additional circuits for EV chargers, home offices and the consumer unit upgrades required to support increasing electrical loads. Our Kirklevington base is five miles from Stockton centre, making us one of the closest electricians available for any urgent work in the borough.
Darlington has one of the highest concentrations of Victorian and Edwardian period property in the Tees Valley — the substantial villas on Coniscliffe Road, Carmel Road and around the West End Conservation Area represent some of the most demanding rewiring projects we encounter. Hartlepool's coastal location adds corrosion considerations for all external electrical installations, particularly in the TS24 and TS25 postcode areas where salt-laden air accelerates deterioration of fittings and enclosures — we specify IP-rated and corrosion-resistant components for all external work in coastal postcodes as standard.
Modern consumer unit installations with full RCBO protection — essential for solar and EV charger readiness.
Electrical Work for Solar and EV Projects in Teesside
Many Teesside homeowners contact us initially for solar panel or EV charger installation and discover during our free survey that electrical remedial work is needed first. A consumer unit that lacks an available MCB slot cannot accommodate a dedicated EV charger circuit without an upgrade. An earthing system in poor condition cannot support the protective earth requirements of a solar inverter. Old rubber-insulated wiring cannot safely carry the additional loads of modern energy systems. Our electrical team can carry out all necessary remedial work and the renewable energy installation in a coordinated programme, saving you the cost and disruption of engaging two separate contractors.
See our detailed guide: Consumer Unit Upgrades for Solar and EV Chargers in Teesside — which explains what triggers the need for an upgrade, what it involves and what it costs in 2026.
Teesside Electrician Locations
Find your local Teesside electrician page for area-specific information.
Get a Free Electrical Quote in Teesside
Whether you need an EICR for a rental property, a consumer unit upgrade, a full rewire or an EV charger installation, contact us for a free, no-obligation assessment. We cover all Teesside postcodes: TS1–TS27.
500+
5-Star Reviews
NAPIT
Registered
Part P
Self-Certified
OZEV
Approved
Request a Free Quote
Responds in <2hrsElectrical Services FAQs
An EICR (Electrical Installation Condition Report) is a comprehensive inspection of your property electrical wiring, consumer unit, earthing and bonding. Landlords are legally required to have an EICR every 5 years for rented properties. Homeowners are recommended to have one every 10 years or when buying a property. An EICR identifies any defects that could pose a safety risk.
A consumer unit (fuse board) upgrade typically costs between £450 and £800 depending on the number of circuits and complexity. This includes a new metal consumer unit with RCBO protection on every circuit, all reconnection work, minor earthing and bonding upgrades if needed, and an EICR on completion. A modern consumer unit is often required before installing EV chargers or solar panels.
The recommended intervals are: rental properties every 5 years (legal requirement), homeowner-occupied properties every 10 years, commercial properties every 5 years, and swimming pools/special locations annually. You should also have electrics tested when buying a property, after any flood or fire damage, or if you notice warning signs like flickering lights, burning smells or frequently tripping breakers.
We prioritise urgent electrical safety issues during our working hours (Monday to Friday 8am-6pm, Saturday 9am-2pm). If you have a complete power loss, burning smell, or other electrical emergency outside hours, call your electricity distributor (Northern Powergrid: 105) for supply issues, or contact us and we will get back to you as soon as possible the next working day.
We cover the whole of Teesside (Middlesbrough, Stockton, Darlington, Hartlepool, Redcar, Yarm, Thornaby, Eaglescliffe, Billingham, Ingleby Barwick, Guisborough), North East England (Durham, Sunderland, Newcastle, Gateshead), North Yorkshire (Northallerton, Stokesley, Thirsk, Ripon, Richmond, York), and parts of West and South Yorkshire.
Yes. ALPS Electrical is registered with NAPIT as a Registered Competent Person for electrical work. This means we are authorised to self-certify notifiable electrical work under Part P of the Building Regulations without needing to involve Building Control. All our work is fully compliant and certified.
More questions? See all electrical FAQs or contact us directly.
Electrical Guides for Teesside Homeowners
Expert advice from our qualified electrical team on EICR testing, rewiring, consumer units and compliance.
EICR Testing: A Complete Guide for Teesside Landlords 2026
Read guide ElectricalConsumer Unit Upgrades for Solar and EV Chargers in Teesside
Read guide ElectricalHouse Rewiring Costs UK 2026: What to Budget and What to Watch For
Read guide ElectricalNAPIT vs NICEIC: What Registered Electrician Means in Teesside
Read guide ElectricalPart P Building Regulations: What They Mean for Homeowners in 2026
Read guideBrowse all electrical guides and articles
View blog